NHR LogoAC and DC electronic loads for automatic test

NH Research, Inc
16601 Hale Ave
Irvine, CA 92606
tel 949.474.3900
fax 949.474.7062


Programmable AC Electronic Loads
programmable ac electronic loads and programmable dc electronic loads


4600 Series AC Electronic Load

  • 3 kW / 30 A modules
  • Power and crest-factor programmability
  • Built-in, high-accuracy measurements
  • Graphical user interface and LabVIEW™ drivers

Appication
The 4600 Series AC Electronic Loads are intended for applications that require the entire range of non-linear loading to thoroughly test AC-output power conversion devices. This programmable load will also eliminate the delays associated with fixed load change-overs. Items tested include uninterruptible power supplies (UPSs) and inverters. The benefits of such a wide range of load control is to assure product performance under all extremes of "real-world" operating conditions.

Broad Operating Envelope
To cover a wide range of UPS and inverter power levels, the 4600 Series AC electronic loads can be paralleled up to 36 kW. All units operate from 50 to 350 VAC-input and in several emulation modes such as constant-current, constant-voltage, constant-resistance, constant-power as well as short-circuit.

A "One- Box" Test Solution
With a PC controller, everything needed to test most AC-output products is contained within the 4600 Series AC Electronic Load. In addition to the flexible load control, twelve high-accuracy measurements include: voltage, current, peak-current, frequency, crest-factor, power-factor and true power. Even the real-time voltage, current and power waveforms are displayed on the PC soft panel. This ability to make all measurements internally eliminates multiple, external stand-alone instruments plus associated signal matrixing and interconnect wiring. In this manner, the 4600 Series AC electronic load provides for a more compact, less costly and considerably faster test solution.

System Or Manual Applications Throughout The Enterprise
The applications for the 4600 Series AC electronic loads are many. While primarily designed for final functional test within an automatic test station, the AC load can be used with just a PC for engineering design verification test, incoming quality inspection and returned unit repairs. To facilitate rapid integration and popular programming language compatibility, the 4600 Series AC load is supplied with a PC-hosted graphic user interface plus LabVIEW™ drivers.


Key Specifications

Power 3 kW, parallelable for higher power
Voltage 50 to 350 V
Current 30 A
Frequency 45 to 440 Hz

This site complies with XHTML, CSS, and Section 508 standards. Designed by SiteLab.